Peeling Paint off of the Dome

So we did not do a good job painting 2 years ago and had many leaks in the roof. The coating we did was too thin and we had trouble using the tar tape over the corner seams of the dome. We were unaware of a different product that is more of an absorbent fabric which is a much better and easier to use product for going over the seams of the building. Once we are done stripping the paint we will use this fabric over the seams and repaint the building in the thermoshield roofing paint. Thankfully we used 3/4" plywood for the roofing and we did not let it be wet for too long so it should not have damaged the roof.

17 views0 comments